Skip to main content

Genesee · Answer · Updated 2026-11-17

How much fat is in a protein bar?

Read the fat rows in order: Total Fat, then Saturated Fat and Trans Fat indented under it. Genesee's 60g bars list 16-17g Total Fat (21-22% Daily Value), 6g Saturated Fat (30%) and 0g Trans Fat.

The panel declares fat in a block: Total Fat, then Saturated Fat and Trans Fat indented under it. 21 CFR 101.9(c)(2) defines each row and sets the rounding behind the printed grams, and the % Daily Value column puts total fat and saturated fat against their Daily Values. Trans fat prints no %DV — that is the rule rather than a missing number.

What sits in the fat block of a Nutrition Facts panel?

Three rows, in this order, on a standard-format panel for a food with 0.5 gram or more of total fat per serving. 21 CFR 101.9(c)(2) defines “Fat, total” or “Total fat” as a statement of the number of grams of total fat in a serving, defined as total lipid fatty acids and expressed as triglycerides. Saturated fat comes next, indented: the regulation defines it as the sum of all fatty acids containing no double bonds. Trans fat is indented too, and the regulation defines it as the sum of all unsaturated fatty acids that contain one or more isolated (i.e., nonconjugated) double bonds in a trans configuration.

The same regulation also lists polyunsaturated fat and monounsaturated fat, and marks both (VOLUNTARY): a panel may declare them, but the fat block this page reads is those three rows. The indentation is part of the declaration — 21 CFR 101.9(c)(2)(i) and (c)(2)(ii) each say the content shall be indented — which is how the panel shows saturated fat and trans fat as parts of the block under Total Fat.

The rounding is part of the definition too. Total fat is expressed to the nearest 0.5-gram increment below 5 grams and to the nearest gram increment above 5 grams, and if the serving contains less than 0.5 gram, the content shall be expressed as zero. Trans fat rounds the same way, so a printed 0g declares an amount below 0.5 gram per serving — the zero is the figure the rule directs.

Why does trans fat print no %DV?

Because no Daily Value has been established for it. The % Daily Value column reports the percent of the DRV for each nutrient “for which a DRV has been established,” in the words of 21 CFR 101.9(d)(7)(ii), and the DRV table in 21 CFR 101.9(c)(9) has no trans fat row.

FDA's label guide states the same fact from the panel side: trans fat and total sugars do not list a %DV on the Nutrition Facts label. The guide also gives the reason — experts could not provide a reference value for trans fat nor any other information that FDA believes is sufficient to establish a Daily Value. The blank beside the trans-fat grams is part of the panel's design, not a printing omission.

What are the Daily Values behind the fat percentages?

21 CFR 101.9(c)(9) establishes the DRV table the %DV column divides by. For adults and children 4 years and older — the table's own basis is a reference caloric intake of 2,000 calories — it sets 78g for fat and 20g for saturated fat. FDA's Daily Value reference guide lists the same amounts: Fat 78g, Saturated fat 20g.

The percentage beside each row is arithmetic. 21 CFR 101.9(d)(7)(ii) says the percent shall be calculated by dividing either the amount declared on the label for each nutrient or the actual amount of each nutrient (i.e., before rounding) by the DRV for the nutrient. FDA's saturated-fat page states the Daily Value for saturated fat: less than 20 g per day, based on a 2,000 calorie daily diet.

FDA's label guide supplies the scale readers apply to any %DV: 5% DV or less of a nutrient per serving is considered low, and 20% DV or more of a nutrient per serving is considered high.

Where does the fat on a Genesee label come from?

The ingredient list names ingredients; the panel's rows state the grams. No label breaks its fat total down by ingredient, and this page does not either. 21 CFR 101.4 gives the list's own rules: ingredients must be listed by common or usual name in descending order of predominance by weight, and each individual fat or oil must be declared by its specific common or usual name.

Read that way, every Genesee list names peanut butter first and grass fed bison tallow after the whey protein isolate and collagen; Coffee Latte's chocolate chips and White Chocolate Toffee's white chocolate chips each name cocoa butter inside their parentheses; Snickerdoodle lists cacao nibs where the other flavors list chips. The order is a relative-weight clue and nothing more: the list attaches no gram figure to any ingredient, so the fat grams a shopper can read are the panel's Total Fat, Saturated Fat and Trans Fat rows.

How much fat is in a Genesee protein bar?

The current 60g labels list 16-17g Total Fat per bar: 17g (22% Daily Value) on Coffee Latte and Snickerdoodle, and 16g (21% Daily Value) on White Chocolate Toffee. All three list 6g Saturated Fat, which the panels show as 30% of the Daily Value, and 0g Trans Fat with no %DV beside it.

Each bar also lists 21g protein. Every flavor declares milk and peanuts; White Chocolate Toffee also declares soy. Recipes and labels can change. Check the package you receive for the current ingredients, nutrition facts, allergens, and caffeine disclosure.

Here are the fat rows, one row per flavor.

  1. Coffee Latte: 17g Total Fat (22% Daily Value), 6g Saturated Fat (30%), 0g Trans Fat
  2. Snickerdoodle: 17g Total Fat (22% Daily Value), 6g Saturated Fat (30%), 0g Trans Fat
  3. White Chocolate Toffee: 16g Total Fat (21% Daily Value), 6g Saturated Fat (30%), 0g Trans Fat

The bar we make

Each 60g Genesee bar lists 21g protein and 290 calories, is sweetened with raw honey (two flavors also list coconut sugar or cane sugar in their chips), uses grass-fed bison tallow with no listed seed oils, and declares milk and peanuts — White Chocolate Toffee also declares soy.

See the barsTry the 3-bar pack

Common questions

How much fat is in a Genesee protein bar?

+

16-17g Total Fat per 60g bar: 17g (22% Daily Value) on Coffee Latte and Snickerdoodle, and 16g (21%) on White Chocolate Toffee. All three also list 6g Saturated Fat (30% Daily Value) and 0g Trans Fat.

What does a printed 0g trans fat mean?

+

It is the rounding rule's zero. 21 CFR 101.9(c)(2)(ii) says that if the serving contains less than 0.5 gram, the content, when declared, shall be expressed as zero. All three Genesee panels print 0g Trans Fat, and the row carries no %DV because no Daily Value has been established for trans fat.

Are saturated fat and trans fat indented under total fat?

+

Yes. 21 CFR 101.9(c)(2)(i) and (c)(2)(ii) each require the content to be indented, and the Genesee panels print both rows that way, inside the fat block under Total Fat.

Does the ingredient list say how many grams of fat each ingredient contributes?

+

No. The list names ingredients in descending order of predominance by weight and attaches no amounts. The Genesee lists name peanut butter, grass fed bison tallow, and — inside the chips' parentheses on Coffee Latte and White Chocolate Toffee — cocoa butter; the fat grams are the panel's Total Fat, Saturated Fat and Trans Fat rows.

Deep dives: Tallow protein bars · Seed-oil-free protein bars

Keep reading: Compare the three Genesee flavor labels · the fat rows on all three labels, side by side · which fats the three ingredient lists name

Sources

Find a flavor that fits your label check.

Compare the full labels, current availability and pack choices. One-time purchase and eligible subscription options are on the product pages. Free US shipping over $65.

Compare flavors and shop →

Subscription options — save up to 20%

Free US shipping over $65·Save up to 20% with subscription

Subscribe